01 – CUSTOM-MADE ASSEMBLY OF THE SHOE
02 – Placing
THE COUNTER
03 – APPLYING TALCUM-POWDER TO THE LAST
04 – PLACING THE UPPER ON THE LAST
05 – CONTROLLING
THE ALIGNMENT
06 – CONTROLLING
MEASUREMENTS
07 – CORRECTION OF THE ALIGNMENT OF THE UPPER
08 – PREPARING THE ASSEMBLY ADHESIVE
09 – HARDENING THE COUNTER
10 – GLUING
THE COUNTER
11 – GLUING
THE COUNTER
12 – POSITIONING
THE COUNTER
13 – ADJUSTMENT OF THE COUNTER
14 – PLACING THE LINING
15 – RE-GLUING
16 – ASSEMBLING THE COUNTER
17 – PLACING THE SKIN
18 – PLACING THE SKIN (DETAILS)
19 – REAR MOUNT ASSEMBLY FINISHED
20 – CUTTING THE SKIN
21 – NAILING
.
22 – CHECKING THE ALIGNMENT OF THE NAILS
23 – FOLDING THE NAILS
.
24 – MEASURING THE POSITION OF THE TOE CAP
25 – TRACING THE TOE CAP ON LINING
26 – GLUING THE TOE CAP BEFORE ASSEMBLY
27 – ASSEMBLING THE TOE CAP WITH NAILS
28 – ASSEMBLING
THE TOE CAP
29 – ASSEMBLING THE TOE CAP
30 – FLAME TREATMENT FOR TIGHTENING THE SKIN
31 – HUMIDIFYING THE INSOLE
32 – CONTROLLING OUTER AND INNER REAR PIECES (QUARTERS)
33 – TRACING
WITH SILVER PENCIL
34 – PREPARING THE WELT (RAINETTE)
35 – PREPARING THE WELT (BISEAU)
36 – STARTING THE POSITIONING OF THE WELT
37 – WELT
.
38 – WELT
39 – WELT
40 – TIGHTENING
ONE OF THE KNOTS
41 – TIGHTENING ONE OF THE KNOTS
42 – STARTER HOLE WITH AWL BEFORE THREADING
43 – PASSING THE BONE ON THE WELT
44 – USING
A BOXWOOD STICK
45 – REFRESHING THE EXCESS OF THE WELT
46 – TIGHTENING
THE
STITCHES
47 – RAND
FILLER
et cambrion
48 – Placing
the
sole
49 – Placing with
a hammer
50 – ADJUSTING THE WELT WITH A BOXWOOD STICK
51 – BROACHING THE OUTSOLE
52 – BROACHING
THE REAR SOLE
53 – ADJUSTING
THE WELT
54 – ADJUSTING WITH A SPECIAL TOOL CALLED ÉBAUROIR
55 – ROUGHING
THE WELT
56 – BROACHING
.
57 – BROACHING
THE FRONT END
58 – SMOOTHING
THE WELT
59 – SMOOTHING
(next)
60 – USING GLASS PAPER ON THE EDGE OF THE OUTSOLE
61 – DYEING
.
62 – DYEING
63 – USING THE FUDGE WHEEL BEFORE SEWING
64 – POSITIONING THE BOAR BRISTLES ON THE THREAD
65 – Polissage de la fixation du poil de sanglier
66 – ENGRAVING
.
67 – GLUING THE ENGRAVING
.
68 – ROUGHING THE OUTSOLE
WITH GLASS PAPER
69 – COMPLETION
OF THE SEWING
70 – SHOE ASSEMBLY BEFORE POLISHING AND SHINING
